STEP® Roof Deicing 12″

STEP® Roof Deicing – 12″ (30cm) for Metal and Shingle Roofs

STEP® Roof Deicing 12″ radiant heating element is designed to solve problems with snow buildup and ice damming on roofs, valleys and eaves.

STEP® Roof Deicing is protected by a 2-mil chemically, inherently inert and dielectric insulation so that the heating element can be installed under all types of roofing materials, including metal roofs.
STEP® Roof Deicing is lightweight, flexible and is malleable to fit around various bends and creases associated with roofing. Make sure to provide proper drainage for the melted ice and snow.

Get a Quote!

Simply download our “Roof Quote Request Form” and email/mail/fax it to your local distributor or directly to us.

Contact Us

Address:

11147 Dorsett Rd. Maryland Heights, St. Louis, MO 63043-3505

Phone Number:

1-877-783-7832

✔ Strong, thin and flexible lightweight element with an impermeable membrane that protects against physical damages and aggressive materials
✔ The elements are designed and typically installed underneath the roof shingles and can be stapled or nailed through without damaging them
✔ Operates on 24 volts (AC/DC); Connect to a power supply, solar or wind power
✔ Self-regulating; As the material gets warmer, less electricity passes through the plastic – therefore it is extremely energy-efficient
✔ Easy to install; roll out the elements and cut to size on the job site, connect wires to power supply and elements
✔ Maintenance-free when installed
✔ Tip for ultimate energy savings; install Heat Retention mat between heating elements and the metal roof

Model:	MEP-30-36W-24V
Heating Element type:	Positive Temperature Coefficient (PTC) semi-conductor polymer
Width:	12" (305 mm)
Length:	Cut to order
Max. Element Length:	33ft (10 m)
Weight:	0.26lb/ft (0.39 kg/m)
Thickness:	3/64" (1.2 mm)
Output Wattage (at 24VAC):	11.0 W/ft (36W/m) @68°F (20°C)Br> 13 W/ft (43 W/m) @32°F (0°C)
Nominal Resistance:	52 Ω/ft (15.8 Ω/m) @68°F (20°C)
Primary Draw on 230V:	0.048 amps per foot (0.305)

Element Length*	Power Supply (24V)	Watts	Amps 120V	Amps 240V
10ft (3.1m)	150VA	132	1.1	0.6
17ft (5.3m)	250VA	225	1.9	1.0
34ft (10.4m)	500VA	450	3.8	1.9
69ft (21.0m)	1000VA	900	7.5	3.8
103ft (31.4m)	1500VA	1350	11.3	5.6

* Maximum total element length per power supply. Element length cut to order Maximum Element Length by Strip: 33ft (10 m)

Scroll to Top