STEP Roof De-icing™ - 12" (30cm)

STEP Roof De-icing™ 12" radiant heating element is designed to solve problems with snow buildup and ice damming on roofs, valleys and eaves. Make sure you provide proper drainage for the melted ice and snow.

STEP Roof De-icing™ is protected by a 2-mil chemically, inherently inert and dielectric insulation so that the heating element can be installed under all types of roofing materials, including metal roofs.


STEP Roof De-icing™ is lightweight and flexible and is malleable to fit around various bends and creases associated with roofing. The radiant heating element comes without slots, but can be special ordered with slots.

  • Features

  • Technical Specifications

  • Ordering Information

Strong, thin and flexible lightweight element with an impermeable membrane that protects against physical damages and aggressive materials
The elements are designed and typically installed underneath the roof shingles and can be stapled or nailed through without damaging them
Operates on 24 volts (AC/DC); Connect to a power supply, solar or wind power
Self-regulating; As the material gets warmer, less electricity passes through the plastic – therefore it is extremely energy-efficient
Easy to install; roll out the elements and cut to size on the job site, connect wires to power supply and elements
Maintenance-free when installed
Tip for ultimate energy savings; install Heat Retention mat between heating elements and the metal roof

Model:
MEP-30-2-36W-24V
Heating Element type:
Positive Temperature Coefficient (PTC) semi-conductor polymer
Width:
12" (305 mm)
Length:
Cut to order
Max. Element Length:
33ft (10 m)
Weight:
0.26lb/ft (0.39 kg/m)
Thickness:
3/64" (1.2 mm)
Output Wattage (at 24VAC): 
11.0 W/ft (36W/m) @68°F (20°C)
13 W/ft (43 W/m) @32°F (0°C)
Nominal Resistance:
52 Ω/ft (15.8 Ω/m) @68°F (20°C)
Primary Draw on 230V:
0.048 amps per foot (0.305)
Element Length*
Power Supply (24V)
Watts
Amps 120V
Amps 240V
10ft (3.1m)
150VA
132
1.1
0.6
17ft (5.3m)
250VA
225
1.9
1.0
34ft (10.4m)
500VA
450
3.8
1.9
69ft (21.0m)
1000VA
900
7.5
3.8
103ft (31.4m)
1500VA
1350
11.3
5.6

* Maximum total element length per power supply. 

Element length cut to order
Maximum Element Length by Strip: 33ft (10 m)

About Us

Electro Plastics, Inc. dba STEP Warmfloor™ is a US manufacturer of electric radiant floor heating, roof de-icing and snow melt systems. The company's headquarters is located in Saint Louis, Missouri, U.S.A. This 35,000 sq feet LEED registered building is a "living laboratory" as proof of the comfort properties and energy efficiency of STEP Warmfloor. 

Approvals

Our radiant heating products are ETL listed, has the CE marking and conforms to ANSI/UL:

 Intertek ETL small    Cemark small


Contact us

  • Address: 11147 Dorsett Rd., Maryland Heights, Missouri, MO 63043-3505.
  • Toll-Free: 1-877-STEPTEC(783-7832)
  • Tel: +1-314-426-3555
  • Fax: +1-314-426-3556
You are here: Snow Melting Roof and Gutter Deicing Products STEP Roof-Deicing 12"