STEP RV™ 12" (30cm) wide radiant heating element is designed to provide heating in RV/s, motorhomes, boats, etc.
STEP RV™ has a higher wattage output than the standard residential elements, as these types of applications normally have higher heat losses.
STEP RV™ is normally connected to a 24V power supply,but it can also run on solar or wind power. If the systemis connected to 12V, the element will give ¼ the
maximum power – 11 W/ft (36 W/m) x (12)2 / (24)2 = 2.75 W/ft (9 W/m).
Features
Technical Specifications
Ordering Information
Strong, thin and flexible element
Designed to provide heated floors in RV's, motorhomes, boats, etc..
Ideal for both renovation and new construction
Operates on 24 volts (AC/DC); Connect to a power supply, solar or wind power
Compatible with any floor covering including, tile, stone, wood, laminate, resilient and carpet.
Self-regulating; As the material gets warmer, less electricity passes through the plastic – therefore it is extremely energy-efficient
Easy to install; roll out the elements and cut to size on the job site, connect wires to power supply and elements
Maintenance-free when installed
| Model: | EP-30-2-36W-24V |
| Heating Element type: | Positive Temperature Coefficient (PTC) semi-conductor polymer |
| Width: | 12" (305 mm) |
| Length: | Cut to order |
| Max. Element Length: | 20ft (6.1 m) |
| Weight: | 0.23lb/ft (0.34 kg/m) |
| Thickness: | 3/64" (1.2 mm) |
| Output Wattage (at 24VAC): | 11.0 W/ft (36W/m) @68oF (20oC) 9.7 W/ft (32 W/m) @86oF (30oC) |
| Nominal Resistance: | 50 Ω/ft (20 Ω/m) @68oF (20oC) |
| Primary Draw on 230V: | 0.048 amps per foot (0.305) |
|
Approx.coverage
|
Element Length*
|
Power Supply (24V)
|
Watts
|
Amps 120V
|
Amps 240V
|
|
150VA
|
132
|
||||
|
250VA
|
225
|
||||
|
500VA
|
450
|
||||
|
1000VA
|
900
|
||||
|
1500VA
|
1350
|
* Maximum total element length per power supply.
Element length cut to order
Maximum Element Length by Strip: 29ft (8.8 m)
