STEP 9″ (22.9 cm) wide radiant heating element is designed for areas that require more narrow elements, 9” instead of 12” (30 cm) due to available width.
STEP 9″ – Heating narrow areas
STEP 9” (23 cm) has a higher wattage than STEP Residential™; the heat output is equivalent to STEP Commercial™.
This element is installed in applications that require more heat output due to a higher heat loss, e.g. on stairs, in tub edges, in shower benches, etc. This radiant heating element can also be installed under the subfloor when spacing between joists is too narrow.
|Heating Element type:||Positive Temperature Coefficient (PTC) semi-conductor polymer|
|Width:||9" (229 mm)|
|Length:||Cut to order|
|Max. Element Length:||33ft (10 m)|
|Weight:||0.18lb/ft (0.27 kg/m)|
|Thickness:||3/64" (1.2 mm)|
|Output Wattage (at 24VAC):|| 6.8 W/ft (22W/m) @68°F (20°C)|
6.3 W/ft (21 W/m) @86°F (30°C)
|Nominal Resistance:||85 Ω/ft (26 Ω/m) @68°F (20°C)|
|Primary Draw on 230V:||0.03 amps per foot (0.305 mm)|
✔ Designed for areas that require more narrow elements and extra heat output
✔ Ideal for both renovation and new construction
✔ Operates on 24 volts (AC/DC); Connect to a power supply, solar or wind power
✔ Compatible with any floor covering including, tile, stone, wood, laminate, resilient and carpet.
✔ Self-regulating; As the material gets warmer, less electricity passes through the plastic – therefore it is extremely energy-efficient
✔ Easy to install; roll out the elements and cut to size on the job site, connect wires to power supply and elements
✔ Maintenance-free when installed