STEP Residential™ - Heating bathroom floors, homes and kitchens

STEP Residential™ 12" (30cm) wide radiant heating element is designed to provide healthy, even and comfortable warmth in a home. This element is ideal for both new construction and renovation.

The Residential heating system can be used to floor warming or as the primary heat source and can be installed under most floor coverings, including tile, stone, hardwood, engineered wood, laminate and carpet. Heating bathroom floors or larger areas will not only increase the comfort, but will also reduce the heating bills. The self regulating properties of the flat 12" wide heating mat makes the heating solution extremly energy efficient compared to any other heating source.  For total heating a heat loss calculation is required.

Take away the chill of cold floors and experience the comfort of heated floors in the bathroom, kitchen or whole house. For even heat distribution, maintain spacing between element strips at 2-3 inches (5-7.5 cm).

  • Technical Specifications

  • Features

Model: EP-30-25W-24V
Heating Element type: Positive Temperature Coefficient (PTC) semi-conductor polymer
Width: 12" (305 mm)
Length: Cut to order
Max. Element Length: 29ft (8.8 m)
Weight: 0.23lb/ft (0.34 kg/m)
Thickness: 3/64" (1.2 mm)
Output Wattage (at 24VAC):  7.8 W/ft (25 W/m) @68°F (20°C)
6.8 W/ft (22 W/m) @86°F (30°C)
Nominal Resistance: 74 Ω/ft (20 Ω/m) @68°F (20°C)
Primary Draw on 230V: 0.034 amps per foot (0.305)
Strong, thin and flexible element
Designed to provide even and comfortable warmth in a home
Ideal for both renovation and new construction
Heat the whole house our just single rooms. A heat loss calculation is required when total heating is expected
Operates on 24 volts (AC/DC); Connect to a power supply, solar or wind power
Compatible with any floor covering including, tile, stone, wood, laminate, resilient and carpet.
Self-regulating; As the material gets warmer, less electricity passes through the plastic – therefore it is extremely energy-efficient
Easy to install; roll out the elements and cut to size on the job site, connect wires to power supply and elements
Can also be installed under the subfloor between the joists when the existing flooring is to be maintained
Maintenance-free when installed

About Us

Electro Plastics, Inc. dba STEP Warmfloor® is a US manufacturer of electric radiant underfloor heating, roof de-icing and snow melt systems. The company's headquarters is located in Saint Louis, Missouri, U.S.A. This 35,000 sq feet LEED registered building is a "living laboratory" as proof of the comfort properties and energy efficiency of STEP Warmfloor®. 

Approvals

Our radiant heating products are ETL listed, have the CE marking and conform to ANSI/UL:

 Intertek ETL small    Cemark small

 

Contact us

  • Address: 11147 Dorsett Rd., Maryland Heights, MO 63043-3505.
  • Toll-Free: 1-877-STEPTEC(783-7832)
  • Tel: +1-314-426-3555
  • Fax: +1-314-426-3556
You are here Floor heating Products and Applications STEP Residential™