STEP Warmfloor™ radiant heating systems are the most energy efficient heating solution available. Do you know that it would require 2.5 times as much energy to gain an equal heat output with cables?
THE ENERGY EFFICIENT CHOICE - STEP Warmfloor™ heating solution was designed for the ultimate in comfort and versatility. With an emphasis on safety and efficiency, STEP Warmfloor™ is ideal for floor warming or complete heating.
STEP Warmfloor™ is approved for use with any floor covering including natural stone, ceramic and porcelain tiles, hardwood and laminates, resilient, and carpet. And, because the heating element can be placed directly below most floor covering, installation is a breeze!
STEP Warmfloor™ is perfect for remodeling, room additions or for new construction projects.
Using STEP Warmfloor™ radiant heating elements eliminates the need for a forced air furnace, which blows dust and particles around. Studies have shown that dust and particles aggravate asthma and other respiratory aliments. Even better each room can be individually controlled.
STEP Warmfloor™ radiant heat is approved for use with any floor covering including: natural stone, ceramic and porcelain tiles, hardwood and laminates, resilient, and carpet. And because the element can be placed directly below the floor covering, installation is a breeze!
STEP Warmfloor™ operates on low-voltage, AC or DC, and does not require a ground fault switch. It is normally connected to a 24 V power supply, but can also be run by solar or wind-power source. The system is maintenance free, easily zoned and energy efficient.
Compared to STEP™ flat heating elements, electric cables need 2.5 times more power and water tubing (1/2") need 2.08 times more power to heat the same floor surface area.
When the temperature difference between a heating element and the environment is minimal, there is less heat loss. Do you know why this is important?
Electro Plastics, Inc. dba STEP Warmfloor™ is a US manufacturer of electric radiant underfloor heating, roof de-icing and snow melt systems. The company's headquarters is located in Saint Louis, Missouri, U.S.A. This 35,000 sq feet LEED registered building is a "living laboratory" as proof of the comfort properties and energy efficiency of STEP Warmfloor.
Our radiant heating products are ETL listed, have the CE marking and conform to ANSI/UL: