Skip to content

Radiant Floor Heating Kits Print E-mail
Heating Element: EP-30-2-24W-24V (7.8 W/ft)
Approx. Area Covered: Up to 250 square feet

  • Residential Kits can be used for all flooring applications (including tile, stone, resilient, hardwood, carpet, etc.)
  • Recommended spacing between strips is 2 to 4 inches
  • Maximum element length per fuse on each TB-4X5A Terminal Board is 5 Amps (15 feet)
  • Maximum total length per strip of element is 24 feet; requires jumping two fuses
  • It is highly recommended to insulate the floor beneath the element
  • Small areas can be controlled by an on/off switch or regulator. For larger areas, contact your local distributor or us directly
  • Refer to the STEP Handbook™ for product specifications and installation procedures

Kit Sizes / Components
Part Number K-150 K-300 K-500 K-750 K-1000 K-1250 K-1500
Approx. Area Covered 25 sqft 50 sqft 80 sqft 120 sqft 160 sqft 200 sqft 250 sqft
Components
Heating Element feet 17 34 58 87 116 144 174
Transformer (120 Vac / 24 Vac) piece 150W 300W 500W 1000W 1000W 1500W 1500W
Terminal Board (4x5 Amps) piece 1 1 1 2 2 3 3
Connector Kit (Up to 5 Elements) pack 1 2 2 3 4 5 6
Wire 14 AWG-B (Black) feet 50 50 100 100 150 250 250
Wire 14 AWG-W (White) feet 50 50 100 100 150 250 250

Optional Accessories / Tools
Accessories
MICROREG (Regulator) piece Time Proportional Controller
DIGI-LUX (Thermostat/Regulator) piece Energy Saving Thermostatic Controller
Tool
Crimp Tool piece Tool is required and can be rented
 
< Prev   Next >
[ Back ]

Getting Started

Search

Did You Know?

STEP Warmfloor™ is the most energy efficient heating available because the material itself is self-regulating and only draws the energy it needs to maintain an even temperature on the whole surface.  The heating elements cannot overheat.