Skip to content

Home arrow Products arrow Snowmelt / Deicing Products arrow STEP Gutter Deicing™
STEP Gutter Deicing™ Print E-mail
PRODUCT SPECIFICATIONS
Heating Element Model:
VEP-7-2-17W-12V

Output Wattage (at 12 Vac):
6.3 W/ft (20.7 W/m) @ 32ºF (0ºC)

Nominal Resistance:
26 Ω/ft (8 Ω/m) @ 68ºF (20ºC)

Width: 4" (10.2 cm)
Length: Cut to Order
Thickness: 3/32" (2.3 mm)
Technical Specifications   |   Approvals   |   Terms and Conditions of Sale

  • STEP Gutter Deicing™ panel is designed to solve problems with snow buildup, ice damming and creation of icicles over entrances, garage doors, pathways, etc.
  • STEP Gutter Deicing™ is embedded between two layers of vinyl to ensure that the panel is protected against UV rays and other physical damages.
  • STEP Gutter Deicing™ panel operates on 12 volts and is connected to a step down transformer making it safe to use.
  • STEP Gutter Deicing™ is self-regulating and cannot overheat, thereby using very little electricity.
  • STEP Gutter Deicing™ panel is light weight, easy to install and can be cut to size on the job site.

System Components
HEATING ELEMENT (VEP-7-2-17W-12V)
Low voltage (12V, AC or DC), self-regulating Positive Temperature Coefficient (PTC) semi-conductive polyethylene enclosed in a protective vinyl sleeve. Patented. Cut to order with 174 feet maximum shipping spool length.
CONNECTORS & SEALANT TAPE (CON-DB & TAPE-1)
Includes CON-DB Crimp Connectors (2 per each heating strip) and enough TAPE-1 Sealant Tape to seal crimped heating element strips to extension wires and to create a watertight seal on both ends of each panel.
TRANSFORMER (EP-150, EP-250, EP-500)
Low voltage dry type isolation transformer. 120 Vac primary and 12 Vac secondary. NEMA 3R enclosure.
EXTENSION WIRE (TCu12-XXX-B/-W)
#12 AWG stranded tinned copper (TCu) PVC insulated wire, 300 Vac, 105°C. Used to extend heating element bus braid wires directly to transformers.

Color Code: -B indicates black; -W indicates white
Spool Length: XXX = 50, 100, 150, 250 or 500 feet
CRIMP TOOL (TOOL-PRO)
Used to crimp CON-DB crimp connector. TOOL-PRO crimp tool is required as it is specially designed to properly crimp CON-DB crimp connector. Tool may be purchased or rented.

Optional Components


Helpful Documents...

Related Links...
 
< Prev

Getting Started

Search

Did You Know?

Studies from the "Sick Building Syndrome" show a direct relation between indoor climate and symptoms such as fatigue and headaches.  Research shows that thermic indoor climate is also related to productivity.  The level of comfort with radiant heat at lower temperatures increases productivity by 20-30%.