Skip to content

EPI-LX-TH Print E-mail
DESCRIPTION
The EPI-LX-TH is a non-programmable thermostat for use with the STEP Warmfloor™ system (in conjunction with the EPI-LX-R power supply series). Temperature is measured in 15 minute cycles by the thermostat's microprocessor, which determines the amount of pulsing (system on/off) needed for each subsequent interval. The EPI-LX-TH pulses the supply voltage of the EPI-LX-R power supply in a manner to help closely match the system heat output with the heating needs for that zone and to prevent temperature overshoot typical with other heating systems. The EPI-LX-TH is designed to be flush wall mounted in a single gang box and should be installed on an inside wall in a place most representative of the zone it controls. Up to 20 EPI-LX-R power supplies can be connected to one EPI-LX-TH thermostat.

PRODUCT SPECIFICATIONS
  • Maximum load: 0.5 A / 24 VAC
  • Heating cycle length: 15 minutes
  • Setpoint range (A mode): 40ºF to 86ºF (5ºC to 30ºC)
  • Accuracy: ± 1.0ºF (0.5ºC)
  • ºF or ºC selectable
PRODUCT FEATURES
  • Easy-to-read backlit display
  • Three temperature conrol modes:
       A mode: controls ambient air temperature
       F mode: controls floor temperature using external temperature sensor (EPI-LX-SEN)
       AF mode: controls ambient temperature with floor temperature limits (EPI-LX-SEN required)
  • On-screen heating power indicator
  • On/Standby switch
  • Slim contemporary design
  • Battery free

Image

Optional Component(s)
FLOOR SENSOR (EPI-LX-SEN)
Floor temperature sensor. Required when using F mode & AF mode on EPI-LX-TH & EPI-LX-THPR thermostats – not required for A mode. Leads are 15 feet in length.


Related Links...
 
< Prev   Next >
[ Back ]

Search

Getting Started

Did You Know?

Studies from the "Sick Building Syndrome" show a direct relation between indoor climate and symptoms such as fatigue and headaches.  Research shows that thermic indoor climate is also related to productivity.  The level of comfort with radiant heat at lower temperatures increases productivity by 20-30%.
 

Attention Customers

Beware of inferior products imitating our patented heating elements.  STEP Warmfloor™ elements bear special markings and are solely manufactured in the USA.  Unlisted heating elements imitating our patented technology may be a potential fire hazard.  Our certified distributors will stock only genuine STEP Warmfloor™ heating elements.