Skip to content

Home
Installation Questions
 

Login with username, password and session length
August 08, 2008, 01:25:41 PM
Pages: [1]
« previous next »
  Print  
   Author Topic: Installation Questions  (Read 555 times)   
Jim C.
Newbie
*
Posts: 1


View Profile
« on: January 21, 2008, 08:21:39 PM »
I would like to install warmfloor in two existing bathrooms that I am going to remodel. I have a basement beneath each bathroom and would like to know if the system works well between floor joists (16" centers). I have 3/4" tounge & groove plywood subfloor and am going to put down ceramic tile. Especially in one bathroom there is nowhere to put transformer except in vanity cabinet, but if able to install heating elements with good heat results between floor joists this would rectify transformer location problem. One bathroom desired floor heating area is 6' long by 3' wide. The second bathroom area would be 7' long by 4' wide. The second bath has an adjoining closet which would make it possible to mount the transformer in if recommended, but I like the idea of putting everything underneath the subfloor. The second bathroom floor joists run the width direction whereas the first bathroom joists run the length direction. Please advise for best results. Thank you.
Logged
bbillhartz
Administrator
Newbie
*****
Posts: 16


View Profile
« Reply #1 on: January 24, 2008, 08:50:26 AM »
Jim, thank you for your question.  One of the greatest benefits of the STEP Warmfloor product is its versatility and ease of installation.  Installing the product between joists is not a problem.  You can staple the heating elements under the floorboards; the elements are one foot wide and fit between the joists.  Do not puncture the bus braids on each side of the element.  Since heat is transmitted by conduction rather than radiation, it is very important to place insulation snug under the heating elements with no air gaps to force the heat up.

We do free quote requests (http://www.warmfloor.com/content/view/44/77/), and I would suggest sending us your dimensions so we can get started on your project. Smiley
Logged
 
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC

Getting Started

Did You Know?

STEP Warmfloor™ is the most energy efficient heating available because the material itself is self-regulating and only draws the energy it needs to maintain an even temperature on the whole surface.  The heating elements cannot overheat.