Skip to content

Home
control stat installation to wall box
 

Login with username, password and session length
August 29, 2008, 01:40:23 PM
Pages: [1]
« previous next »
  Print  
   Author Topic: control stat installation to wall box  (Read 1131 times)   
chuckcap
Newbie
*
Posts: 1


View Profile
« on: September 07, 2007, 04:19:04 PM »
i have the analog type of wall stat with a 4"x4" wall electric box I an can find a box cover that fits the control.   Most allow for standard single outlets that are too small or dual outlet covers that are too big.   This control looks like its inbetween.   I checked with numerous suppliers and they do not carry a plate that fits the controller.   
Logged
bbillhartz
Administrator
Newbie
*****
Posts: 16


View Profile
« Reply #1 on: September 12, 2007, 08:26:19 AM »
Quote from: chuckcap on September 07, 2007, 04:19:04 PM
i have the analog type of wall stat with a 4"x4" wall electric box I an can find a box cover that fits the control.   Most allow for standard single outlets that are too small or dual outlet covers that are too big.   This control looks like its inbetween.   I checked with numerous suppliers and they do not carry a plate that fits the controller.   

Chuck,

If you are referring to the MICROREG controller, it should have been packaged with a cover to fit a single gang box electrical box.
Logged
 
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC

Getting Started

Did You Know?

Studies from the "Sick Building Syndrome" show a direct relation between indoor climate and symptoms such as fatigue and headaches.  Research shows that thermic indoor climate is also related to productivity.  The level of comfort with radiant heat at lower temperatures increases productivity by 20-30%.