Skip to content

Home arrow Support arrow Support Forum
Transformer to Terminal Wiring
 

Login with username, password and session length
July 20, 2008, 07:10:35 PM
Pages: [1]
« previous next »
  Print  
   Author Topic: Transformer to Terminal Wiring  (Read 335 times)   
Eric V
Newbie
*
Posts: 1


View Profile
« on: April 02, 2008, 09:03:02 AM »
I am installing a heating system for a large entertainment area in my basement.  For convenience, I would like to locate the transformers in a utility room.  The wiring run from transformers to terminal boards is approx. 28 ft.  Installation instructions say to use #6 wire for this distance.

I have #6 THHN wire.  Does this wire need to be in conduit, if it runs through enclosed wall?

If so, are there limitations on size and type of conduit for this application?
Logged
bbillhartz
Administrator
Newbie
*****
Posts: 16


View Profile
« Reply #1 on: April 03, 2008, 08:23:18 AM »
Eric,

Unfortunately, I cannot answer your question, as installations of this nature vary depending on where you live.  In many instances, a conduit is not needed.  A proper (and inspector-friendly) installation is to be made in accordance to local codes and ordinances. These codes may require special wiring or a conduit (plastic or metal) in the walls.
Logged
 
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC

Getting Started

Did You Know?

STEP Warmfloor™ is the most energy efficient heating available because the material itself is self-regulating and only draws the energy it needs to maintain an even temperature on the whole surface.  The heating elements cannot overheat.