Skip to content

Home arrow Support arrow Support Forum
Crimp Connectors
 

Login with username, password and session length
November 22, 2008, 05:10:15 AM
Pages: [1]
« previous next »
  Print  
   Author Topic: Crimp Connectors  (Read 1084 times)   
pringstrom
Newbie
*
Posts: 1


View Profile
« on: December 10, 2007, 11:20:00 AM »
I want to install a 3/8" wood floor above your heating elements. Won't the thickness of the crimped wire connectors to the bus braids make an uneven surface bump to apply the wood flooring to? Do I need to install another layer of plywood over it to even everything out?
Logged
bbillhartz
Administrator
Newbie
*****
Posts: 18


View Profile
« Reply #1 on: January 09, 2008, 09:51:24 AM »
Thank you for your question.  A crimped wire connector is only slightly thicker than the element thickness, which is only 3/64".  It is best to have the elements in contact with the finished wood flooring.  You shouldn't have an uneven surface bump problem, so it is not necessary to install another layer of plywood over the elements.
Logged
 
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC

Getting Started

Did You Know?

Indoor Air Quality is directly correlated with respiratory illness.  The last thing you want your mechanical system to do is to distribute dust, mold spores, pollen, and other particulates throughout the structure. Because radiant heat does not blow allergens, it helps those with allergies and asthma find dramatic improvement to their symptoms.