Skip to content

Home arrow Support arrow Support Forum
Crimp Connectors
 

Login with username, password and session length
August 27, 2008, 10:05:34 PM
Pages: [1]
« previous next »
  Print  
   Author Topic: Crimp Connectors  (Read 681 times)   
pringstrom
Newbie
*
Posts: 1


View Profile
« on: December 10, 2007, 11:20:00 AM »
I want to install a 3/8" wood floor above your heating elements. Won't the thickness of the crimped wire connectors to the bus braids make an uneven surface bump to apply the wood flooring to? Do I need to install another layer of plywood over it to even everything out?
Logged
bbillhartz
Administrator
Newbie
*****
Posts: 16


View Profile
« Reply #1 on: January 09, 2008, 09:51:24 AM »
Thank you for your question.  A crimped wire connector is only slightly thicker than the element thickness, which is only 3/64".  It is best to have the elements in contact with the finished wood flooring.  You shouldn't have an uneven surface bump problem, so it is not necessary to install another layer of plywood over the elements.
Logged
 
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC

Getting Started

Did You Know?

Studies from the "Sick Building Syndrome" show a direct relation between indoor climate and symptoms such as fatigue and headaches.  Research shows that thermic indoor climate is also related to productivity.  The level of comfort with radiant heat at lower temperatures increases productivity by 20-30%.