Skip to content

Home arrow Support arrow Support Forum
control stat installation to wall box
 

Login with username, password and session length
November 22, 2008, 07:20:57 AM
Pages: [1]
« previous next »
  Print  
   Author Topic: control stat installation to wall box  (Read 1478 times)   
chuckcap
Newbie
*
Posts: 1


View Profile
« on: September 07, 2007, 04:19:04 PM »
i have the analog type of wall stat with a 4"x4" wall electric box I an can find a box cover that fits the control.   Most allow for standard single outlets that are too small or dual outlet covers that are too big.   This control looks like its inbetween.   I checked with numerous suppliers and they do not carry a plate that fits the controller.   
Logged
bbillhartz
Administrator
Newbie
*****
Posts: 18


View Profile
« Reply #1 on: September 12, 2007, 08:26:19 AM »
Quote from: chuckcap on September 07, 2007, 04:19:04 PM
i have the analog type of wall stat with a 4"x4" wall electric box I an can find a box cover that fits the control.   Most allow for standard single outlets that are too small or dual outlet covers that are too big.   This control looks like its inbetween.   I checked with numerous suppliers and they do not carry a plate that fits the controller.   

Chuck,

If you are referring to the MICROREG controller, it should have been packaged with a cover to fit a single gang box electrical box.
Logged
 
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC

Getting Started

Did You Know?

STEP Warmfloor™ is the most energy efficient heating available because the material itself is self-regulating and only draws the energy it needs to maintain an even temperature on the whole surface.  The heating elements cannot overheat.