STEP Commercial™ - Heating offices, warehouses, factories etc.

STEP Commercial™ 12" (30cm) radiant heating element is designed to provide healthy and comfortable heat in an office, warehouse, factory,etc. The element can be used in new construction and for renovation.

STEP Commercial™ can be installed in concrete or over the concrete slab and can go under most floor coverings. 

It does not create drafts and blow dust around. The heat stays where you need it – at the body level and not in the ceiling.

STEP Commercial™ is maintenance-free and does not require a mechanical room or dangerous storage of gas or fuel.

  • Features

  • Technical Specifications

  • Ordering Information

Strong, thin and flexible element
Designed to provide healthy and comfortable warmth in an office, warehouse, factory, etc.
Heat the whole warehouse or just office areas. A heat loss calculation is required when primary heating is expected
Install elements in concrete or over concrete slab
Ideal for both renovation and new construction
Operates on 24 volts (AC/DC); Connect to a power supply, solar or wind power
Compatible with any floor covering including, tile, stone, wood, laminate, resilient and carpet.
Self-regulating; As the material gets warmer, less electricity passes through the plastic – therefore it is extremely energy-efficient
Easy to install; roll out the elements and cut to size on the job site, connect wires to power supply and elements
Maintenance-free when installed and does not require a utility room or dangerous storage of fuel or gas

Model: EP-30-2-29W-24V
Heating Element type: Positive Temperature Coefficient (PTC) semi-conductor polymer
Width: 12" (305 mm)
Length: Cut to order
Max. Element Length: 50ft (15 m)
Weight: 0.23lb/ft (0.34 kg/m)
Thickness: 3/64" (1.2 mm)
Output Wattage (at 24VAC):  9.0 W/ft (29W/m) @68oF (20oC)
8.4 W/ft (27 W/m) @86oF (30oC)
Nominal Resistance: 64 Ω/ft (20 Ω/m) @68oF (20oC)
Primary Draw on 230V: 0.039 amps per foot (0.305)
Element Length*
Power Supply (24V)
Watts
Amps 120V
Amps 240V
50ft (17.5 m)
500VA
450
3.75
1.9
1000VA
900
7.5
3.8
1500VA
1350
11.25
5.6

* Maximum total element length per power supply. 

Element length cut to order
Maximum Element Length by Strip: 50ft (15 m)

About Us

Electro Plastics, Inc. dba STEP Warmfloor™ is a US manufacturer of electric radiant floor heating, roof de-icing and snow melt systems. The company's headquarters is located in Saint Louis, Missouri, U.S.A. This 35,000 sq feet LEED registered building is a "living laboratory" as proof of the comfort properties and energy efficiency of STEP Warmfloor. 

Approvals

Our radiant heating products are ETL listed, has the CE marking and conforms to ANSI/UL:

 Intertek ETL small    Cemark small


Contact us

  • Address: 11147 Dorsett Rd., Maryland Heights, Missouri, MO 63043-3505.
  • Toll-Free: 1-877-STEPTEC(783-7832)
  • Tel: +1-314-426-3555
  • Fax: +1-314-426-3556
You are here: Floor heating Products and Applications STEP Commercial™